(function(w,d,s,l,i){w[l]=w[l]||[];w[l].push({'gtm.start': new Date().getTime(),event:'gtm.js'});var f=d.getElementsByTagName(s)[0], j=d.createElement(s),dl=l!='dataLayer'?'&l='+l:'';j.async=true;j.data-privacy-src= 'https://www.googletagmanager.com/gtm.js?id='+i+dl;f.parentNode.insertBefore(j,f); })(window,document,'script','dataLayer','GTM-KG7FSNP');

Dynapac CC1000e Roller

Dynapac CC1000e Roller

The Dynapac CC1000e is a fully electric twin drum roller designed for efficient, zero-emission compaction on small to medium asphalt projects. It delivers the same high-quality finish and maneuverability as the standard CC1000, while offering quiet operation and the ability to complete a full working day on a single charge—ideal for urban and environmentally sensitive job sites.

Download CC1000E Roller Brochure

Category:

Description

The Dynapac CC1000e is part of Dynapac’s next-generation electric compaction range, built to provide sustainable performance without compromising productivity. Designed for applications such as pavements, cycle paths, car parks, and small roadwork, it combines compact dimensions with modern electric drive technology.

Unlike traditional diesel rollers, the CC1000e uses a lithium-ion battery system and electric motors for both propulsion and vibration, resulting in reduced noise, zero exhaust emissions, and lower operating costs. Despite its electric design, it maintains strong compaction performance and can operate for a full working day under typical conditions without recharging.

The machine retains Dynapac’s proven twin drum setup, with vibration and drive on both drums for consistent compaction results. Its compact size, articulated steering, and balanced weight distribution allow it to work efficiently in confined areas while still delivering high-quality finishes.


Key Features

  • Fully electric drive system (zero emissions)
  • Full-day operation on a single charge (typical use)
  • Twin drum vibration for uniform compaction
  • Low noise levels—ideal for urban and indoor work
  • Dyn@Link system for fleet monitoring and machine control

Technical Specifications

Dimensions & Weight

  • Operating weight: 1,775 kg
  • Max operating weight: 1,840 kg
  • Drum width: 1,000 mm
  • Drum diameter: 584 mm
  • Overall length: approx. 2,040–2,095 mm
  • Overall width: approx. 1,070 mm
  • Height (ROPS): approx. 2,300 mm
  • Turning radius (outside): approx. 2,860 mm

Electric Drive & Battery

  • Drive motor: Permanent magnet electric motor
  • Drive power: approx. 11 kW
  • Vibration motor power: approx. 9.4 kW
  • Battery type: Lithium-ion
  • Battery capacity: 14.8 kWh
  • Voltage: 48 V

Charging

  • Charging time (20–80%):
    • 230V single phase: ~6 hours
    • 400V three phase: ~1.3 hours

Performance

  • Travel speed: 0–9 km/h
  • Static linear load (front/rear): 8.7 / 9.1 kg/cm
  • Vibration frequency: approx. 60 Hz
  • Water tank capacity: approx. 105 litres
  • Articulation (steering angle): ±34°

Reviews

There are no reviews yet.

Be the first to review “Dynapac CC1000e Roller”

Your email address will not be published. Required fields are marked *

Go to Top