-
Bonded seal for 415 drain plug Bonded seal for 615 drain plug -
Bronze bush choose of two fitted : bronze bush 0561404 - OD 28.28 - ID 22.3 mm needle bearing 0562002 - OD 28 - ID 20 mm -
For Newage gearbox Needle bearing choice of two fitted- needle bearing 0562002 - OD 28 - ID 20 mm
- bronze bush 0561404 - OD 28.28 - ID 22.3 mm
-
No longer available -
208mm long input shaft possible require 40M968 - 216mm long input shaft -
GearBox lid rubber cover -
No longer available -
Ring or email if required, possible have a good used spacer available -
front bellhousing to gearbox casing gasket -
This is for 1 x pad only there are 2 required for each gearbox -
Spring on bottom of gearlever -
need to check size of input & output shaft for wear bearing size : OD 22.225 - ID 15.875 -
Straight gearlever 640mm Would need to bend to suit a Barford 3ton as original is NLA for a: Ausa D300 with a Kubota engine use 85M938ASSY Benford/Terex 3ton Kubota engine 85m933 - Deutz or Lister 40M852 Thwaites 7000 Perkins 40M852 - Lister 40m796 - Yanmar 53854 -
216mm long input shaft possible require 40M117 - 208mm long input shaft -
Choice of two shafts 85m814 216mm long 85m905 223mm long -
Choice of two shafts 85m905 223mm long 85m814 216mm long -
20mm tip on main shaft if your is 22m would need either 85m2/sae4 kit - for machine with 8 hole bell housing 85m2/sae5 kit - for machine with 12 hole bell housing -
for machines using a carbon thrust bearing, generally these machine have a 8" or 9" clutch Lister, Deutz or Perkins Yanmar TNE engines alternately for machine with metal thrust bearing, generally these machine have 9.5" clucth fitted with Kubota & Yanmar TNV engines use CM2765 -
This is for 1 x spring only there are 2 required for each gearbox -
This is for 1 x bush only there are 2 required for each gearbox -
for machine with metal thrust bearing, generally these machine have 9.5" clucth fitted with Kubota & Yanmar TNV engines alternately for machines using a carbon thrust bearing, generally these machine have a 8" or 9" clutch Lister, Deutz or Perkins Yanmar TNE engines CM2083 -
suits 40m394 shaft not 53430 shaft -
Drain Plug 40m gearbox Drain Plug 85m gearbox Drain Plug 415 axle Drain Plug 615 axle -
This is for 1 x Ball only there are 2 required for each gearbox -
Gear lever Nut -
Download parts diagrams and email with page and item numbers for price. Parts diagram The G2000 Dropbox has three variations in ratio 12,14 and 16 ratio this can be identify by either serial number plate or the punch mark on case.
-
Dogleg bend directly from gearbox lid usually fits: Benford/Terex with a Deutz or Lister engine (not kubota 85m933) Thwaites 7000 with Perkins engine (not Lister 40m796 or Yanmar 53854 Barford original is NLA would need to use straight lever a bend to suit 40M796 Terex 3ton kubota engine Newage gearbox 85M933 -
Both new and used are no longer available. -
Modified oversized fork to allow for wear in case -
Sorry both new and used NLA -
this is the only layshaft now available diameter were needle bearing fits (bell housing side of case) 25mm hole in case diameter 32mm -
Sorry both new and used are no longer available. -
Straight gearlever 485mm -
Dogleg bend halfway up lever usually fits: Benford/Terex with a Kubota engine (not Deutz or Lister 40M852) Does not fit any Thwaites - for Thwaites 7000 Perkins 40M852 - Lister 40m796 - Yanmar 53854 Barford original is NLA would need to use straight lever a bend to suit 40M796 -
Dogleg bend halfway up lever usually fits: Ausa with a Kubota engine Does not fit any Benford/Terex - for Benford/Terex 3ton Kubota engine 85m933 - Deutz or Lister 40M852 Does not fit any Thwaites - for Thwaites 7000 Perkins 40M852 - Lister 40m796 - Yanmar 53854 Barford original is NLA would need to use straight lever a bend to suit 40M796 -
