-
-
Fits in:
CPKIT22 - Bolt Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Fits in:
CPKIT24 - Bolt Benford/Terex 5 to 6 Dumper pre 1998 with rectangle King link-bar.
CPKIT27 - Bolt Benford/Terex/Meclac 5 to 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Fits in:
CPKIT21 - Benford/Terex/Mecalac 2 & 3 ton dumpers.
CPKIT23 - Benford/Terex 5 & 6 ton dumpers with rectangle King Link-Bar pre 1998.
CPKIT26 - Benford/Terex/Meclac 5, 6 & 7 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
CPKIT28 - Benford/Terex/Meclac 9 & 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Fits in:
CPKIT27 - Bottom slotted nut Benford/Terex/Meclac 5 to 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Fits in:
CPKIT20 - Jubilee clip
CPKIT22 - Jubilee clip Benford/Terex/Mecalac 2 & 3 ton dumpers.
CPKIT24 - Jubilee clip Benford/Terex 5 to 6 Dumper pre 1998 with rectangle King link-bar.
CPKIT27 & 29 - Jubilee clip Benford/Terex/Meclac 5 to 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Clamp plate OD140mm x ID82mm
Fits in :
CPKIT22 - Lower clamp plate Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Fits in :
CPKIT21 - Middle centre pin Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Fits in :
CPKIT22 - Lower centre pivot bush Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Fits in :
CPKIT20 - Clamp washer Benford/Terex/Mecalac 2 & 3 ton dumpers also 5 to 6 Dumper pre 1998 with rectangle King link-bar.
CPKIT22- Clamp washer Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Bearing retaining clamp OD140mm x ID82mm
Fits in :
CPKIT22 - Bearing retaining clamp Benford/Terex/Mecalac 2 & 3 ton dumpers.
-
Clamp plate OD 90mm x ID 60MM
Fits in :
CPKIT29 - Top rear clamp plate Benford/Terex/Meclac 5 - 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Clamping plate OD 160mm x ID 90mm
Fits in :
CPKIT24 - Clamping plate for Benford/Terex 5 to 6 Dumper pre 1998 with rectangle King link-bar.
CPKIT27 - Clamping plate for Benford/Terex/Meclac 5 to 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
-
Fits in :
CPKIT24 - Lower bush Benford/Terex 5 to 6 Dumper pre 1998 with rectangle King link-bar.
-
Fits in :
CPKIT23 - Main centre pin Benford/Terex 5 & 6 ton dumpers with rectangle King Link-Bar pre 1998.
All of our Benford, Terex, Terex/JCB and Mecalac centre pivot parts are either genuine or made by OEM suppliers to the same and, in some cases, greater standard than the original and are made in the United Kingdom. Unlike some companies than advertise on the internet, none of our engineering is carried out in China so you can be assured than the pins are not made out of recycled baked bean cans but are manufactured out of the correct grade steel, heat treated and hardened to the correct specification and therefore you are not compromising on the integrity of your Benford, Terex, Terex/JCB or Mecalac dumper. Remember, that centre pivot pin is the only thing keeping the two halves of your dumper together. Don’t let cheap components make your 1 x 6 tonne Benford, Terex, Terex/JCB or Mecalac dumper turn into 2 x 3 tonne dumpers by fitting a cheap pin from the internet.