-
CPKIT20 Top centre pivot kit with bearings to press into linkbar (no linkbar included)
Fits Benford/Terex/Mecalac 2 & 3 ton dumpers also 5 to 6 Dumper pre 1998 with rectangle King link-bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT29 Top centre pivot kit
Fits Benford/Terex/Meclac 5 - 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT20A Top centre pivot kit C/W linkbar
Fits Benford/Terex/Mecalac 2 & 3 ton dumpers also 5 to 6 Dumper pre 1998 with rectangle King link-bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT24 Bottom centre pin kit.
Fits Benford/Terex 5 to 6 Dumper pre 1998 with rectangle King link-bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT22 Bottom Centre Pin Kit
Fits Benford/Terex/Mecalac 2 & 3 ton dumpers.
Top kit consist of:
Individual parts available separate.
-
CPKIT27 Bottom centre pin kit.
Fits Benford/Terex/Meclac 5 to 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT20.5 Front top centre pivot kit with bearing to press into linkbar (no linkbar included)
Fits Benford/Terex/Mecalac 2 & 3 ton dumpers also 5 to 6 Dumper pre 1998 with rectangle King link-bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT29F Top front half centre pivot kit
Fits Benford/Terex/Meclac 5, - 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT23 Middle Centre Pin Kit
Fits Benford/Terex 5 & 6 ton dumpers with rectangle King Link-Bar pre 1998.
Top kit consist of:
Individual parts available separate.
-
CPKIT26 Middle Centre Pin Kit
Fits Benford/Terex/Meclac 5, 6 & 7 ton dumpers after 1998 when fitted with rounded front end King Link Bar 50mm pin.
(not 9 or 10 ton dumper)
Top kit consist of:
Individual parts available separate.
-
CPKIT21 Middle Centre Pin Kit
Fits Benford/Terex/Mecalac 2 & 3 ton dumpers.
Top kit consist of:
Individual parts available separate.
-
CPKIT28 Middle Centre Pin Kit (not 5 & 6 ton)
Fits Benford/Terex/Meclac 9 & 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
Top kit consist of:
Individual parts available separate.
-
CPKIT29R Top rear half centre pivot kit
Fits Benford/Terex/Meclac 5, - 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar.
Top kit consist of:
Individual parts available separate.
As repairing a centre pivot on your Benford, Terex, Terex/JCB and Mecalac dumper is not normally done on site but back in a workshop, it means you can schedule the work, order the parts and when they arrive bring the machine back to the workshop to carry out the work safe in the knowledge that you will have all the parts to carry out the job. No delays, no hassle, no extended downtime…….. CPK’s give you single part ordering, one carriage charge and are ideal for planned maintenance. Dependent on which one, CPK’s contain nuts/bolts/bearings/pins/seals/washers/clips/covers/grease nipples etc for your Benford, Terex, Terex/JCB and Mecalac dumper and offer a considerable saving over purchasing the individual items. All the items are in a single bag so can be stored and easily identified at a later date and all parts for your Benford, Terex, Terex/JCB and Mecalac dumper are either genuine or sourced from an OEM supplier to the same standard and specification as the original part.
If time is not of the essence and you can afford to strip your dumper down before ordering the parts, individual items for your Benford, Terex, Terex/JCB and Mecalac dumper centre pivot are available from the humble grease nipple to the large bottom bearing, from the bearing cap plates to the jubilee clips, PES have it all.