-
CPKIT29R Top rear half centre pivot kit Fits Benford/Terex/Meclac 5, - 10 ton dumpers after 1998 when fitted with rounded front end King Link Bar. Top kit consist of: Individual parts available separate. -
To suit Epiroc / Atlas copco hydraulic hammer for excavators 1.1 - 3 tons -
To suit Epiroc / Atlas copco hydraulic hammer for excavators 1.9 - 4.5 tons -
To suit Epiroc / Atlas copco hydraulic hammer for excavators 0.7 - 1.1 tons -
IF TA6 After serial number EE6PJ5645 use FILTBENTA9-10-DZ Kit fits Terex / Mecalac TA5 / TA6 dumper with Deutz Tier 4 DPF engine manufactured approx 2013 onwards Kit includes Filters available separately. -
TA5 - Terex / Mecalac dumper with Perkins Tier 3 engine, metal fuel tank, metal hydraulic tank & ITL transmission manufactured from Apr'08-Mar'13 TA6 - Terex / Mecalac dumper with Perkins Tier 3 engine, metal fuel tank, metal hydraulic tank & ITL transmission manufactured from Apr'08-Mar'13 TA7 - Terex / Mecalac dumper with Perkins Tier 3 engine, metal fuel tank, metal hydraulic tank & ITL transmission manufactured from Apr'08-Mar'13 Kit includes Filters available separately. -
Kit fits TA5, TA6, TA9 & TA10 - Terex / Mecalac dumper with JCB Tier 4 final engine approx '15 onwards Kit includes Filters available separately. -
Kit fits Terex / Mecalac TA6 dumper with Deutz Tier 4 DPF engine Kit includes Filters available separately. -
Kit fits Terex / Mecalac TA6 dumper with Deutz Tier 4 DPF engine Kit includes Filters available separately.
-
Kit fits Terex / Mecalac TA6, TA6s, TA9, TA9s dumpers with Perkins 904J-E36TA stage V engine Filter available separately. -
Also fits TA6 after serial number EE6PJ5645 Kit fits Terex / Mecalac TA9 & TA10 dumper with Deutz Tier 4 DPF engine manufactured approx '13 onwards Kit includes Filters available separately.
-
Kit fits Terex / Mecalac TA9-TA10 with Perkins T3 engine, metal tanks & ITL transmission Apr'08-Mar'13 Kit also includes water separator filter Filters available separately. -
The Newage 40M gearbox fitted to Benford / Terex / Mecalac PT2000 and PS2000 dumpers is a simple non-synchromesh gearbox with 3 forward and 1 reverse gear. The design of the Newage 40M gearbox did not change for years and was available in several different builds including with a built in dropbox. There are literally thousands of Newage 40M gearboxes in circulation and since Newage went into administration PES have manufactured the internal components using the original Newage suppliers to ensure the continuity of parts for your Benford / Terex / Mecalac PT2000 and PS2000 dumpers. Most Newage 40M parts are available, apart from castings, from stock for next day delivery or PES are able to offer complete service exchange Newage 40M gearboxes from stock or can quote to repair your existing Newage 40M gearbox in your Benford / Terex / Mecalac PT2000 and PS2000 dumpers. -
The Newage 40M gearbox fitted to Thwaites 2 Tonne straight and Thwaites 2 Tonne Swivel is a simple non-synchromesh gearbox with 3 forward and 1 reverse gear. The design of the Newage 40M gearbox did not change for years and was available in several different builds including with a built in dropbox. There are literally thousands of Newage 40M gearboxes in circulation and since Newage went into administration PES have manufactured the internal components using the original Newage suppliers to ensure the continuity of parts for your Thwaites 2 Tonne straight and Thwaites 2 Tonne swivel. Most Newage 40M parts are available, apart from castings, from stock for next day delivery or PES are able to offer complete service exchange Newage 40M gearboxes from stock or can quote to repair your existing Newage 40M gearbox in your Thwaites 2 Tonne straight and Thwaites 2 Tonne swivel.
-
Click link to Download parts manual -
Click link to Download parts manual -
Original 40M133 is NLA - only non genuine is now available -
This service kit will fit a Thwaites MACH201-EARLY 1 Tonne Hydrostatic Transmission, Hi-Tip Dumper with a Yanmar 3TNV7-KWA engine pre prefix 15. With a 212mm long hydraulic filter, if your hydraulic filter is 230mm long would need FILTTHWMACH201-15 kit Filters available separate upon request. -
This service kit will fit a Thwaites MACH201 1 Tonne Hydrostatic Transmission, Hi-Tip Dumper with a Yanmar 3TNV76-KWA engine prefix 15 onwards. With a 230mm long hydraulic filter, if your hydraulic filter is 212mm long would need FILTTHWMACH201-EARL kit Filters available separate upon request. -
Kit fits 10 ton Terex / Mecalac / Benford dumper with Cummin engine. Kit includes: Filters available separately. -
3TNV88-XWA2 -
Gear lever Nut -
Exhaust manifold gasket 3TNV76-KWA
-
Purchasing non-genuine part will potentially void engine/vehicle warranties. We recommend using original manufacturer-approved parts to ensure safety, reliability, and longevity. -
push rod 3TNV76-KWA
-
kit fits 3 ton Thwaites manual dumper with Yanmar 3TNV88-XWA2 Kit includes: Filters available separate. -
9” Clutch Assembly (clutch plate has 10 splines) Kit includes Ref 1 x 13, 1 x 16, 2 x 17 & 1 x 18 on Diagram Fits Thwaites, Benford, Barford, Terex & Winget 4WD 2 – 3 ton dumpers. (not Kubota or Yanmar engines) Kit Includes: -
The Newage 40M gearbox fitted to Barford SX2000, Barford SXR2500 is a simple non-synchromesh gearbox with 3 forward and 1 reverse gear. The design of the Newage 40M gearbox did not change for years and was available in several different builds including with a built in dropbox. There are literally thousands of Newage 40M gearboxes in circulation and since Newage went into administration PES have manufactured the internal components using the original Newage suppliers to ensure the continuity of parts for your Barford SX2000 or Barford SXR2000 dumper. Most Newage 40M parts are available, apart from castings, from stock for next day delivery or PES are able to offer complete service exchange Newage 40M gearboxes from stock or can quote to repair your existing Newage 40M gearbox in your Barford SX2000 or Barford SXR2000 dumper.
-
The Newage 85M gearbox fitted to Barford SX3000, Barford SXR3000 is a simple non-synchromesh gearbox with 3 forward and 1 reverse gear. The design of the Newage 85M gearbox did not change for years and was available in several different builds including with a built in dropbox. There are literally thousands of Newage 85M gearboxes in circulation and since Newage went into administration PES have manufactured the internal components using the original Newage suppliers to ensure the continuity of parts for your Barford SX3000 or Barford SXR3000 dumper. Most Newage 85M parts are available, apart from castings, from stock for next day delivery or PES are able to offer complete service exchange Newage 85M gearboxes from stock or can quote to repair your existing Newage 85M gearbox in your Barford SX3000 or Barford SXR3000 dumper.
-
The Newage 85M gearbox fitted to Barford 3 Tonne straight and Barford 3 Tonne swivel is a simple non-synchromesh gearbox with 3 forward and 1 reverse gear. The design of the Newage 85M gearbox did not change for years and was available in several different builds including with a built in dropbox. There are literally thousands of Newage 85M gearboxes in circulation and since Newage went into administration PES have manufactured the internal components using the original Newage suppliers to ensure the continuity of parts for your Barford 3 Tonne straight and Barford 3 Tonne swivel dumper. Most Newage 85M parts are available, apart from castings, from stock for next day delivery or PES are able to offer complete service exchange Newage 85M gearboxes from stock or can quote to repair your existing Newage 85M gearbox in your Barford 3 Tonne straight and Barford 3 Tonne swivel dumper.
-
Volvo genuine filters are specifically designed to increase productivity of your Volvo EC13 excavator -
Volvo genuine filters are specifically designed to increase productivity of your Volvo EC20 XT / EC20XTV excavator -
Volvo genuine filters are specifically designed to increase productivity of your Volvo EC30 excavator
