-
1000mm / 39” Throttle cable for terex / Mecalac TA1 foot throttle dumper.
(full description below)
-
T127940
3700mm / 145” long Handbrake cable for Terex TA2 and TA3 dumper with Dana Spicer axles.
(full description below)
-
1586-1633
1600mm / 63” long Handbrake cable for Terex / Mecalac 5 to 6 tonne dumpers 2009 onwards.
(full description below)
-
1586-1323
940mm / 37” Throttle cable for Terex 5,6 and 7 tonne dumper year 2004 to 2009 with a Perkins engine. (not cummin engine)
(Full description below)
-
1583-1733
1050mm / 41” Throttle cable for Terex 2 and 3 tonne dumper year 2008-2012 Kubota engine (not a TA2).
(Full description below)
-
1586-1634
1280mm / 50” Throttle cable for Terex/Mecalac 3 tonne dumper year 2012 onwards with a Kubota engine & 6 ton TA6 year 2009-2013 with a perkin engine.
(full description below)
-
1586-1508
870mm / 34” Throttle cable for Terex 5,6 and 7 tonne dumper year 2005 to 2009 with a Cummin engine. (not perkin engine)
(full description below)
-
1594-1480
1130mm / 44.5” Throttle cable for Terex TA9-TA10 tonne dumper year 2009 - 2013 with Perkin engine.
(full description below)
-
1594-1400
2000mm / 79” long Handbrake cable for Terex / Mecalac 9 to 10 tonne dumpers 2009 onwards.
(full description below)
-
K70
1200mm / 47” long Handbrake cable for Benford / Terex TT2000 – TT2500 dumper.
(full description below)
-
1597-1037
3610mm / 142” long Handbrake cable for Terex TA2 tonne dumper 2009 with Newage axles.
(full description Below)
-
1583-1571
1060mm / 42” Throttle cable for Terex 2 – 3 tonne dumper year 2005-2007 Kubota engine.
(Full description below)
-
1640mm /65” Hand Throttle lever assembly for Terex HD1000 – TA1EH 1 tonne dumper.
(full description below)
-
1594-1212
1170mm / 46” Throttle cable for Terex 9 – 10 tonne dumper.
(full description below)
-
1583-1208
1170mm / 46” Clutch cable for Terex 2 to 3 tonne dumper approx. year 1992 - 2001.
(Full description below)
These cables transmit motion between two mechanical devices e.g dumper clutch pedal to dumper clutch, and therefore cheap cables are not able to take the high loads without deflecting and therefore break easily. All of our Benford, Terex, Terex/JCB and Mecalac cables are either genuine or manufactured by OEM suppliers to the same original specification and therefore of a sufficient quality to be fit for purpose. All of our Benford, Terex,Terex/JCB, and Mecalac dumpers cables are self-lubricating/sealed for life or greasable and have superior protection from the elements therefore making them last longer than the cheap on-line alternatives. They all have the correct end on, clevis, spring or nipple and therefore you won’t have difficulty fitting it because it is a close alternative rather than the correct one that PES would supply. If you need a dumper throttle cable, dumper clutch cable or dumper handbrake cable for your Benford, Terex, Terex/JCB, Mecalac dumper you might as well talk to the professionals at PES and get the best quality, correct fitting cable that will get your site dumper back on the road earning money rather than trying to fit a cheap, on-line alternative that doesn’t quite fit and breaks again within a short time period.